Bare Aluminum Mast

If you're bored reading yet another post about my mast-climbing heroics, just imagine how I feel. I'm the one doing the climbing, grunting and scraping! Funny thing is I like it.

Everybody is asking (telling) me, "Why don't you take the mast down, lay it on some sawhorses, use some power tools, get it over with and act like a normal person?" To which I reply (or think to myself), "If I were normal, I wouldn't own a sailboat." What am I supposed to do in my spare time, learn to play cards?

Besides, it's no big deal, another 50 or 60 hours dangling up there and I'll finish the job. I might even wax it in the end. If I were younger and keeping Jakatar for an extended period, after a good "up-and-down" sanding, I'd wet sand it every 3 years with penetrating oil and it would look flashier than a Los Vegas neon sign. 

I experimented using a 2000 watt heat gun and a scraper (Ryker's suggestion, the man knows everything, almost), and it worked really well. The mast barely warms up. The trick is to maintain the scraper's edge hot, you know, much like the hot knife and butter analogy. The heat gun is good for working at deck level, but higher up the mast swinging on the top-climber I'd surely burn my nose off sooner or later, and might even look better for it.

This is a semi-finished section. The yellow blotches are etch primer that need to be sanded with very fine sandpaper, maybe 400 grit. I tried a green SOS pad (basically a dish-washing pad) but it didn't do the trick, it didn't do anything. A light sanding (always in the up-down direction) will bring it to a nice homogeneous shine. The blotches that developed under the paint must also be eliminated if it's going to look respectable.

Skeptics may point out that I'll be wearing  the mast away by sanding it. But, believe me, its a thick-walled heavy duty stick compared to the flimsy paper-thin masts on production boats. If I sand 500 grams or even 1 kg from the 50-foot mast, that means it will most likely last only 99.9 years instead of 100. And it must be good quality aluminum too because previously scraped spots basically stay the same over time, almost like the bare hull of an aluminum sailboat. If it doesn't corrode or go black, why paint it? I've never seen a painted Ovni sailboat or their owners fretting about it.

Look at that, from a short distance the bottom section, not yet finished, already looks like serious business. A real mast, a mast worthy of a tough blue-water sailboat.

How people can live fulfilling lives without a boat is beyond me...unless they just fell in love or some dang thing like that. But then again, anything that makes sense is beyond me anyway, so no hard feelings.

BREAKING NEWS
I've decided to buy another boat in the near future. A small production sailboat that will heel like mad with the wind in my teeth, a prayer in my pocket and just enough food and water to make it there, wherever that will be. I definitely don't want to die watching TV and eating croutons.

If I don't fall from the mast first, that is.

Bare Aluminum Mast

If you're bored reading yet another post about my mast-climbing heroics, just imagine how I feel. I'm the one doing the climbing, grunting and scraping! Funny thing is I like it.

Everybody is asking (telling) me, "Why don't you take the mast down, lay it on some sawhorses, use some power tools, get it over with and act like a normal person?" To which I reply (or think to myself), "If I were normal, I wouldn't own a sailboat." What am I supposed to do in my spare time, learn to play cards?

Besides, it's no big deal, another 50 or 60 hours dangling up there and I'll finish the job. I might even wax it in the end. If I were younger and keeping Jakatar for an extended period, after a good "up-and-down" sanding, I'd wet sand it every 3 years with penetrating oil and it would look flashier than a Los Vegas neon sign. 

I experimented using a 2000 watt heat gun and a scraper (Ryker's suggestion, the man knows everything, almost), and it worked really well. The mast barely warms up. The trick is to maintain the scraper's edge hot, you know, much like the hot knife and butter analogy. The heat gun is good for working at deck level, but higher up the mast swinging on the top-climber I'd surely burn my nose off sooner or later, and might even look better for it.

This is a semi-finished section. The yellow blotches are etch primer that need to be sanded with very fine sandpaper, maybe 400 grit. I tried a green SOS pad (basically a dish-washing pad) but it didn't do the trick, it didn't do anything. A light sanding (always in the up-down direction) will bring it to a nice homogeneous shine. The blotches that developed under the paint must also be eliminated if it's going to look respectable.

Skeptics may point out that I'll be wearing  the mast away by sanding it. But, believe me, its a thick-walled heavy duty stick compared to the flimsy paper-thin masts on production boats. If I sand 500 grams or even 1 kg from the 50-foot mast, that means it will most likely last only 99.9 years instead of 100. And it must be good quality aluminum too because previously scraped spots basically stay the same over time, almost like the bare hull of an aluminum sailboat. If it doesn't corrode or go black, why paint it? I've never seen a painted Ovni sailboat or their owners fretting about it.

Look at that, from a short distance the bottom section, not yet finished, already looks like serious business. A real mast, a mast worthy of a tough blue-water sailboat.

How people can live fulfilling lives without a boat is beyond me...unless they just fell in love or some dang thing like that. But then again, anything that makes sense is beyond me anyway, so no hard feelings.

BREAKING NEWS
I've decided to buy another boat in the near future. A small production sailboat that will heel like mad with the wind in my teeth, a prayer in my pocket and just enough food and water to make it there, wherever that will be. I definitely don't want to die watching TV and eating croutons.

If I don't fall from the mast first, that is.

Performance Pocket Cruiser Review no. 1 - Etap 26i

Candidate no. 1 - Etap 26i

Downloadable Owner's manual (pdf)

Aesthetic appeal

The Etap 26i was love at first sight. I'm enamoured with its looks, layout, construction quality, and unsinkability. It can be sailed with a hole in the hull, but what I really like about this feature is that a leak will not sink it when docked or anchored (dealing with a sunken boat is a huge logistics headache).

Another thing I really like about the Etap 26i is its interior. The cabin is flooded with light, and you can look where you're going and up at the sails while making lunch. A small boat interior can't get much more cheerful than this.

The stern has a very inviting swim platform which also looks like a dream for stepping into and out of the dinghy. Although it's a modern production boat, it has the look of a serious cruiser (which it isn't).  

The interior plan is standard for an modern 8 m sailboat, which is good. I don't see how anyone could significantly improve the layout in this size of boat. Perfect for a solo sailor.

Hull, rig and engine

The Etap company has closed, but this is what they used to say about the Etap 26i

- The only unsinkable Yachts in the world

- Condensation free

- Highly thermal and acoustic insulation

- Double-skinned deck and hull give stable structure

- Interior in sound structural polyester

- High resale value

Etaps aren't merely unsinkable, they can still be sailed even when holed. Here's a report in a Yachting Monthly article about testing a flooded Etap 21i:

"Gert, the Etap representative onboard, has done this a few times, most notably in a 24-ft Etap, crossing the Channel twice in a day with the boat flooded. He estimated that flooding slows the boat down by 1 knot, not bad considering he reefs to reduce strain on the rig."

Note that the following photograph is of an Etap 21i.

The bunk locker lids were barely awash when the water ingress stopped (Etap 21i). ~ Courtesy of Yachting Monthly

I don't like the saildrive configuration, and the 10 hp power engine may be under-muscled for motoring against waves, wind and current on my way back north. Sailing solo between ports (with legs up to 60 miles), I don't have the luxury of tacking my way up the coast when the wind is on the nose. There is too much traffic to take naps and too many fishing net markets to motor at night. I've been trapped twice already, and diving in to cut the boat and prop free is no picnic.

I don't know what to think about Etap's that come with a shallow tandem keel. If the tandem keel works as well as the designer says, what's there not to like? If they don't perform as well, and I happen to buy one, a shallow draft has a number of advantages.

The tandem keel consists of two short keels joined by a bulb.

Etaps with a fin keel are, I presume, more efficient upwind, but the tandem keel would be great for anchoring closer to shore where it's less crowed and for exploring shallower areas in the coast of Algarve where I don't dare go with my current Corbin 39. It would also make it easier to careen the boat on a sand bank to scrub the bottom, scrape he prop, change the anode or just for fun!

My first impression is that the sail plan and rig seem to be more suitable to day-sailing than for my cruising trips along the Portuguese coast, which is known for its somewhat boisterous trade winds and severe conditions at various capes, particularly on hot afternoons.

I need a boat that sails well downwind (when I go south) and reasonably well upwind (when I return sailing north). I hate motoring unless there's no alternative, then I live with it.

Here is an Etap 26i sailing:

The Bergstrom rig on the Etap 26i has no backstay, which is compensated by its swept-back spreaders. This also explains its large main sail with a generous roach and small self-tacking genoa.

I've noticed, such as in the above film, that some owners upgraded to a larger genoa. I would suspect they were unhappy with the smaller sail's performance. But since the rig was designed for a small genoa, could a larger genoa pose a risk in stronger wind?

The boat's setup raises at least two key issues: its ability to sail downwind efficiently; and its capacity to cope with strong wind on a beam reach, particularly with its ballast  displacement ratio just shy of 30%.

When sailing downwind, the swept-back spreaders prevent easing the mainsail far enough for optimum performance. This problem could be overcome by employing a smallish and easy to handle asymmetrical spinnaker. After all, I'm not trying to break speed records, I merely want to sail from port to port fast enough to arrive before dark rather than having to motor and/or motorsail.

The problem of not being able to fully ease out and depower the main sail in strong beam-reach winds is more worrisome. And believe me, if you cruise Portugal's coast and its nasty capes where winds can escalate from a breeze to vicious storm-like winds in minutes, not being able to depower a large main could put a huge load on the rig and sails and even lead to a wind-and-wave induced broach. In this scenario, a solo sailor also has to struggle to maintain his balance in a steeply slanted and unstable cockpit at at time when he must act fast to bring the boat under control, especially since the autopilot will almost certainly be overpowered.

Reef, reef early and deeply, the experts say. I say it too, but sailing is not always that simple or logical. I don't always follow this advice on my current boat, a Corbin 39, but that's because it's built for hell and high water.

On the other hand, the small genoa combined with the battened mainsail may be great for upwind sailing...at least that's what I think and hope.

Price

Ads in February 2017:

Year of build       Asking prices in euros
1995                    21,570 / 24,000 / 26,000
1996                    25,000
1999                    26,000
2004                    33,000

And what are the forums saying about this boat:

"I have an Etap 26i (as opposed to the older 26) fixed keel (not tandem) and she's a great boat. The self-tacking jib makes for a stress free time in busy waters and as an etap owner already you'll know the benefits of the double skin and buoyancy (although ok, storage can be less). The only thing I would say is that due to the Bergstrom rig with swept back spreaders, you have to gybe a bit more as a straight down-wind jaunt puts the main onto the spreaders... my next step is to look into a spinnaker to sort that out."

"I owned one for 5 years after upgrading from a 22 Etap. Great sailing boat. Can't think of any negative aspects. I sailed with our family of 4 kids , later bought a 30 Etap so sailed etaps for 15 years. Couldn't afford a 35 so switched brands."

More information may be added to this post. In the meantime, It's a boat to take seriously in my quest to be a happy sailor.

Owning a Sailboat that Makes you Happy

This is my current sailboat, a Corbin 39.

Jakatar sailing upwind along the Portuguese coast.

I bought the unfinished Jakatar in Canada 18 years ago and sailed it to Europe in 2002. It's ridiculously overbuilt and has never let me down in nearly 10,000 ocean miles, including a nasty mid-ocean storm.

Now that Jakatar is almost finished, this solo sailor is dreaming of a smaller boat. Jakatar was designed for a larger and perhaps younger crew dreaming of going places - maybe crossing oceans - or even living aboard.

I began this blog solely as a process for deciding which boat I want to buy - the best sailboat for coastal cruising on a budget. It's also a way to commit myself to the process, to create momentum, excitement and to set the dream on fire again. Without commitment and momentum, nothing is going to happen.

Future posts will deal with topics such as:

Why do I want a smaller boat

Where will I be sailing it

Why size is crucial

Hull type

New, used, classic or in need of repair

Budget
Equipment

etc.

More information about Jakatar, my misadventures and musings can be found on my other blog zentozero.

Any comments, suggestions, confessions, opinions or even rants are welcome.  

Stormy Weather, Bad Film, Wet Feet, Good Times

"Red Alert: waves potentially 12 to 14 m high and strong winds. Potential disaster when peak wave heights coincide with high tide at 18:00 h," said the national weather forecast. Windguru showed waves of 8.5 m from 293º. Go figure.

I arrived at the marina at 14:00 h to participate in the excitement, maybe even watch the whole kit and caboodle float away in broken pieces. I'm not a masochist, but who would want to miss a show like that.

After rearranging the fenders, lashing the main and stay sails better and adding a few strategic dock lines, I waited inside doing nothing useful, occasionally popping my head out the companionway only to see harmless foam spraying over the breakwater. 

At about 16:00 the waves began to pound louder and the foam turned to green water - foamy sheets washing over the parking lot and into the marina.

This is how it looked at about 17:00 h, shot with my Rollei 415 action cam. Pedro who runs a café in town offered to edit my next film, it's that bad. Except for the waves toward the end.

A reader, Fernando, sent photographs of me making my escape.

Two marina dock fingers broke and that's about it.

"Red Alert: waves potentially 12 to 14 m high and strong winds. Potential disaster when peak wave heights coincide with high tide at 18:00 h," said the national weather forecast. Windguru showed waves of 8.5 m from 293º. Go figure.

I arrived at the marina at 14:00 h to participate in the excitement, maybe even watch the whole kit and caboodle float away in broken pieces. I'm not a masochist, but who would want to miss a show like that.

After rearranging the fenders, lashing the main and stay sails better and adding a few strategic dock lines, I waited inside doing nothing useful, occasionally popping my head out the companionway only to see harmless foam spraying over the breakwater. 

At about 16:00 the waves began to pound louder and the foam turned to green water - foamy sheets washing over the parking lot and into the marina.

This is how it looked at about 17:00 h, shot with my Rollei 415 action cam. Pedro who runs a café in town offered to edit my next film, it's that bad. Except for the waves toward the end.

A reader, Fernando, sent photographs of me making my escape.

Two marina dock fingers broke and that's about it.

Life Afloat a Corbin 39

Purely out of boredom, I made three New Year's resolutions, and I'm glad I did:

1. Exercise arduously on a regular basis, rather than off and on. (I'm sticking to it.)
2. Spend more time on the boat. (I'm starting to do it.)
3. Buy only what I need. (I bought a Rollei 415 action cam and a 32 GB card for 100 euros. Am I sticking to it? Sort of.) Alright then, I need to make another resolution.
4. Shoot more films.

This was my first rushed and disastrous attempt at underwater filming (I promise I'll have something better soon). I had my phone in hand running an app that allows me to see what the camera is filming and to control it using a WiFi connection. As soon as the camera went underwater, plunk, the WiFi connection died. The app works great out of the water though, and so does the camera. I'm looking forward to mounting it on the stern rail on my next wet and wild sail at Cabo Raso or going past Sagres. I still have my Toshiba camcorder for good weather conditions.

Hopefully I can now inspect the boat's prop, the ocean floor, and whether the anchor is properly set - if it's not too deep - and other exciting stuff. I'll practice at the marina. Owning a 12-meter boat is a real cool way to spend all my money, time and to never grow up and become bored!

I didn't shoot a better underwater scene because I rushed off to help Manuel remove his masthead fitting. We motored his boat to the fishing dock where a cherry picker made the job easy.

I was down on the boat but, in retrospect, should have been up there too holding the mast steady allowing him to work with both hands.

The story goes like this: he ordered a new full-battened mainsail but, for a mysterious reason, the sailmaker designed a huge roach (the back part of the sail). It overlaps the backstay and makes tacking very difficult, not to mention that it would eventually destroy the sail. Since the extra roach makes the boat sail like a bat-out-of-hell, Manuel immediately fell in love with it and is now building a very long masthead fitting to position the backstay farther back.

Meanwhile, I'm redoing Jakatar's aft berth because a leak (or two) caused a lot of rot to the mostly unpainted/unvarnished decorative wood panels. Does it make sense to have ugly decorative panels? I think I'll order another two komacel sheets. Komacel never rots, looks professional (if I don't screw it up) and is maintenance free. Dish out another 200+ euros and the privilege of doing more slave work for the voluptuous mistress.

The ceiling panels at the back are rotten. I painted the side panels years ago, but not the backs, which got mushy and caused the visible bulge. It's all garbage, komacel is the way to go.

In the process of removing the old panels which I'll use as templates.

Finally, just in case you're not totally bored yet, I think I'll add a picture of a Portuguese man o' war, also known as the man-of-war, blue bottle, or floating terror, which floated by Jakatar while anchored at Berlenga Island, just as I was musing about whether to dive in and check the propeller for barnacle growth.

Later, after Googling it to confirm that it really was the "floating terror", I read that you're supposed to notify the authorities immediately after spotting one. The wind blew it right up to the boat and toward the tip of the island where there is no beach. Didn't hear any terrifying screams all afternoon, so I assume nobody got attacked.

This happened during a trip to Berlengas with my brother Cesar, his partner Kathleen, my nephew Justin, and Nancy and Drew from Canada.